|
原帖由 彩云指南 于 2010-8-27 11:20 发表
我手上的是h501w,泛光,去美国之前在爱德家给杨肖展示居然烧毁了,回来发回厂家修理,目前还没事。缺点就是中白光在泛光情况下亮度走夜路有点不够,比较适合营地照明,不过重量倒是真的很轻。
梦梦的是 ...
http://www.zebralight.com/H60w-Headlamp-Neutral-White_p_12.html
玩灯的朋友强烈推荐,平时他们工作时都会用。
高亮情况下也能坚持数小时,当然这主要是18650的功劳。
估计进山常规使用,一个星期2个电池足够了。
斑马灯最好两个,肩带上一边一个,简直就是开车进山搞光污染了,哇咔咔~~~~
Description | The ZebraLight H60w is a high performance all aluminum headlamp with a warm white tint LED. Powered with one 18650 battery, the H60w can produce a maximum of 157 Lumen out the front (Torch Lumen) with a smooth flood beam and and can run continuously for 26 days on its lowest output level. The H60w can be used as a headlamp as well as a task light with supplied accessories.
Main Features and SpecificationsLED: Cree XLamp XR-E Q3 5A Color Temperatures: 4000-4300 K 3 modes, each can be set to one of the two levels for that mode - High: 157 lm (2 hours) or 91 lm (4 hours)
- Med: 37 lm (10 hours) or 12 lm (50 hours)
- Low: 0.4 lm (26 days) or 2.4 lm (9 days)
Low and Med settings are memorized. Factory default settings are 110, 15 and 3 lm. All output are out the front (Torch Lumen) figures. Tested with Panasonic 2550 mAh 18650 batteries. Battery - One 18650 size (up to 67mm long) rechargeable within the 2.8v to 4.5v range, including 3.6v/3.7v Li-ion or 3.0v LiFeP04 chemistries.
- Reverse polarity protection circuit. Works with batteries that have flat positive terminals.
- Discharging protection circuit turns off the light when the battery voltage drops below 2.8v.
Battery Shelf Life: Over 4.5 years under parasitic drain
Out of the six levels, four (190, 110, 15, and 3 lm) are current regulated and two (45 and 0.5 lm) are PWM derived.
Electrically conductive aluminum body provides inherent EMI/RFI shielding characteristics Weight - 1.2 oz (33 gram)
- 2.7 oz (77 gram) with battery
- 3.5 oz (100 gram) with battery and headband
Dimensions - Length 3.6 inch (91mm)
- Diameter (body) 0.85 inch (21.5 mm)
- Diameter (head and tail) 0.92 inch (23.5 mm)
- 80 degree flood beam, with no hotspot.
ConstructionPrecision machined casing from Alcoa premium grade aluminum alloy billet, light weight with superior structural strength Durable natural hard anodized finish (Type III Class I) - Impact resistant LEXAN polycarbonate lens
OperationsFrom Off - Press and hold to cycle through Low, Med and High, release to set.
- Click to High, click again quickly to cycle through Med, Low and High.
- When On
- Click to Off.
- Press and hold to cycle through Low, Med and High, release to set.
- Double click to toggle between the two levels for that mode.
Note: Low and Medium settings are memorized after the light is turned off. High setting stays at the 110 lm (i.e. not memorized) after the light is turned off. High setting to the 190 lm has a 10 minute timer that automatically switch the light back to the 110 lm to prevent the light from overheating. Battery power can be locked out by slightly unscrewing the tailcap to prevent the light from unwanted activations. Battery power can be locked out by slightly unsrewing the tailcap to prevent the unwanted activations.
WaterproofMeets IP68 in accordance with IEC 60529 - Dust-tight
- Protected against continuous immersion (1meter, >30 minutes)
Accessories in the package- One black silicone holder with headband
- Pocket clip, can be put on or removed without any tools
- Two O-rings
- One glow in the dark silicone holder
|
|
|
|