|
楼主 |
发表于 2006-1-19 12:24
|
显示全部楼层
4)the long pole is the shoulder pole.it follows the main zipper canoy on the outside,with its ends seated in grommets on each side.insert one end betweenthe head pole and the cannopy at the top.push the pole along the seam--at the bottom,thread the pole through the reinforcedgap and place the end in the grommet,with your fingers ,owrk the bend at the middle of the long pole back under the awning until it lies against the seam.NEXT,work the other enbend of the pole throught the reinforced gap at the bottom of the awning.separate the bottom segment of the pole from the rest of the pole,and bend the pole to get it througt the gap. carefully reconnect the pole segment and make sure it sliders all the way closed.insret the end into the grommet |
|